3. Connect to the NVR
There are various ways you can connect to the NVR and below are the suggested methods for
different network setup:
The NVR is placed in a network with a DHCP server: Connect to the NVR by using “Device Search”
Utility.
The NVR is placed in a network without DHCP server (or you are connecting to it directly): Access
NVR with its default IP (192.168.0.20).
3.1 Use Device Search Utility
If the NVR is placed in a corporate network or a local area network where a DHCP server is already
presented, please install the “Device Search” utility from the bundled CD disk.
To begin, launch the Device Search” utility from the CD and proceed with the installation.
15
