PLANET NAS-7400 User Manual
125
8.6 Checking File System Status in PASM
Typically the first indication of a problem with the NAS-7400’s file system is
when your network drive becomes unavailable.
You might also see the message, “File system contains errors. Please check.”
when you click on the icons under the File & Print menu.
To view File System status:
i.
Start PASM.
ii.
In the Tree, click on the “+” button beside the “RAID & File
System” icon.
iii.
Click on the “File System Management” icon.
iv.
Look for the RAID Volume “ ” icon on the File System Status tab. If
the RAID Volume icon is Critical “ ”, the file system contains errors
and you must rebuild the file system. See below.
Rebuilding the File System
Note
When you rebuild a File System, you delete all the folders in the RAID
volume and all the data saved in the folders.
To rebuild a File System:
i.
In the Tree, click on the “+” button beside the “RAID & File
System” icon.
ii.
Click on the “File System Management” icon.
iii.
In the “File System Status” tab, click on the “RAID Volume
Critical ”icon to display the “Rebuild File System” button.
iv.
Click on the “Rebuild File System” button.
v.
In the confirmation box, type “yes” into the field provided and click
the “OK” button.
8.7 Checking the Event Log in PASM
To view the Event Log in PASM:
To check Enclosure status:
i.
Start PASM.
ii.
In the Tree, click on the “+” button beside the “Management”
icon.
