Gigabit Multi-Homing VPN Security Router User’s Manual
3B
Chapter 4: Login VPN Security Router
This chapter is mainly introducing Web-based UI after connecting VPN Router.
First, check up VPN Router IP address by connecting to DOS through the LAN PC under VPN Security
Router. Go to Start
→
Run, enter cmd to commend DOS, and enter ipconfig for getting Default Gateway
address, as the graphic below, 192.168.1.1. Make sure Default Gateway is also the default IP address of VPN
QoS Router.
"
Attention
When not getting IP address and default gateway by using “ipconfig”, or the received IP address
is 0.0.0.0 and 169.X.X.X, we recommend that users should check if there is any problem with the
circuits or the computer network card is connected nicely.
Then, open webpage browser, IE for example, and key in 192.168.1.1 in the website column. The login
window will appear as below:
- 11 -