Planet MGSD-10080F Скачать руководство пользователя страница 77

Страница: 77 / 641

User’s Manual of MGSD-10080F

Client Statistics

Object

Description

•

Transmit to Client

The number of relayed packets from server to client.

•

Transmit Error

The number of packets that resulted in error while being sent to servers.

•

Receive form Client

The number of received packets from server.

•

Receive Agent Option

The number of received packets with relay agent information option.

•

Replace Agent Option

The number of packets which were replaced with relay agent information option.

•

Keep Agent Optin

The number of packets whose relay agent information was retained.

•

Drop Agent Option

The number of packets that were dropped which were received with relay agent

information.

Buttons

Auto-refresh

: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.

: Click to refresh the page immediately.

: Clear all statistics.

4.2.11 CPU Load

This page displays the CPU load, using a

SVG graph

The load is measured as average over the last 100ms, 1sec and 10 seconds intervals. The last 120 samles are graphed, and

the last numbers are displayed as text as well.

In order to display the SVG graph, your browser must support the SVG format. Consult the SVG Wiki for more information on

browser support. Specifically, at the time of writing, Microsoft Internet Explorer will need to have a plugin installed to support

SVG. The CPU Load screen in

Figure 4-2-14

appears.

Содержание MGSD-10080F


































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание MGSD-10080F

Отзывы:

Бренды по названию

Популярные бренды

Planet MGSD-10080F, Руководство пользователя

Результаты поиска

Содержание MGSD-10080F

Отзывы:

Бренды по названию

Популярные бренды