Page 53 of 97
Traffic Shaping
- add page contain the following parameter:
Protocol
– Click on
“Protocol”
drop down menu to select “tcp”, “udp”, or
“both” protocol of Traffic Shaping.
Port
– Enter the Traffic Shaping port number.
Min Size
– Enter the minimum packet size of Traffic Shaping.
Max Size
– Enter the maximum packet size of Traffic Shaping.
Priority
– Click on
“Priority”
drop down menu to select priority “Background”,
“Video”, “Voice” or “Best effort”.
Comments
– Enter Traffic Shaping comments.
Active
– Click on
“Active”
drop down menu to enable or disable this entry.
“Apply”
button – Click on
“Apply”
button to confirm add Traffic Shaping.
New settings are active after the device reboot.
i.
If you select to edit existing Traffic Shaping, a page similar to Figure 3.4.6.2 with
configured settings will be displayed.
3.4.7
Service > PPTP Server
(MAP-3100 only)
Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks
( VPNs ). PPTP Server configuration page is shown in Figure 3.4.7.1.
Figure 3.4.7.1: PPTP Server configuration page
