Page 41 of 97
3.3.8
Network > L2TPC
(MAP-3100 only)
Layer 2 Tunneling Protocol ( L2TP ) is a tunneling protocol used to support virtual private
networks (VPNs). L2TPC serves as a L2TP client that creates a tunnel through existing
network to the designated peer computer or network. L2TCP configuration page is shown in
Figure 3.3.8.1.
Figure 3.3.8.1: L2TPC configuration page
To configure L2TPC:
Click on
“Active”
drop down menu to enable or disable L2TPC service.
Enter the L2TP LNS address.
Enter L2TP username.
Enter L2TP password.
Re-enter L2TP password to confirm it.
Click on
“Apply”
button if you have made any changes. New settings are
active after the device reboot.