Page 20 of 97
3.2.2
System > Syslog
Syslog configuration page is shown in Figure 3.2.2.1.
Figure 3.2.2.1: Syslog configuration page
To use Syslog:
a.
Click on
“Active”
drop down menu to enable or disable System Logging service.
b.
Click on
“Klog”
drop down menu to enable or disable Kernel Logging service.
c.
Select the logging level. There are 8 levels. If “Debug” is selected, all messages will be
recorded.
d.
Click on
“Remote Syslog”
drop down menu to enable or disable remote syslog
server.
e.
Enter the remote syslog server address.
f.
Click on
“Apply”
button if you have made any changes. New settings are active after
the device reboot.
