Page 18 of 97
3.2
System
3.2.1
System > System
System Information page is shown in Figure 3.2.1.1.
Figure 3.2.1.1: System Information page
To configure System Information:
a.
Enter the name of device.
b.
Enter the location name that device located.
c.
Enter the contact person name for consulting about the device.
d.
Enter the contact person Email address.
e.
Enter the contact person phone number.
f.
Enter the description of the device.
g.
Object ID displays SNMP MIB object identification (OID) of system.
h.
Click on
“Operation Mode”
to select “Gateway”, “Relay”, “Client Relay”, “Layer 2
Gateway”, or “Layer 2 Relay”.
Gateway
(MAP-3100 only)
Layer 3 Gateway Mode. In a Mesh network Gateway mode is the
path to the Internet for the whole Mesh network behind.
WAN port is active and will be used for Internet Connection. Three
types of Internet connection will be available, please refer to
section 3.3.2 for more.
