Planet ISW-1022M Скачать руководство пользователя страница 83

Страница: 83 / 141

User’s Manual of ISW-1022M

The switch with the lowest Bridge ID (switch C) was elected the root bridge, and the ports were selected to give a high port

cost between switches B and C. The two (optional) Gigabit ports (default port cost = 4) on switch A are connected to one

(optional) Gigabit port on both switch B and C. The redundant link between switch B and C is deliberately chosen as a 100

Mbps Fast Ethernet link (default port cost = 19). Gigabit ports could be used, but the port cost should be increased from

the default to ensure that the link between switch B and switch C is the blocked link.

5.6.2.4 RSTP System Configuration

This section provides RSTP-System Configuration from the Switch, the screen in

Figure 5-42

appears.

The user can view spanning tree information of Root Bridge.

The user can modify RSTP state. After modification, click

Apply

Figure 5-42

RSTP System Configuration interface

The page includes the following fields:

Object

Description

RSTP mode:

The user must enable the RSTP function first before configuring the related

parameters.

Содержание ISW-1022M














































































































































Результаты поиска

Содержание ISW-1022M

Отзывы:

Planet ISW-1022M, Руководство пользователя, Страница: 83 / 141

Результаты поиска

Содержание ISW-1022M

Отзывы: