IP-based 4/8-port Switched Power Manager Power
IPM-4220 / IPM-8220
-
74
-
Appendix A: Resetting to Default via Reset
Button
Users who forget the network account and password of the product can press "Reset" to recover to the
factory default values, and the device will reboot at the same time.
Step 1
. Press and hold "RESET" for more than 3 seconds. When LED starts flashing, release the hold.
You are then asked fill out the admin account and password as
admin
(add a new account if no
admin account).
Device IP will be automatically acquired through DHCP (if there is no DHCP
server, the device IP should be preset as
192.168.0.10
). The acquired IP is displayed on
theLCD panel.
Step 2.
Press and hold RESET for more than 10 seconds. When LED is on, release "RESET" to clear
all the data of the device.
Default DHCP Client
On
Default IP Address
192.168.0.10 – if no DHCP existed in the network
Default Port
80
Default Login User Name
Set itself
Default Login Password
Set itself
Search Tools
ip_search
