IP-based 4/8-port Switched Power Manager Power
IPM-4220 / IPM-8220
-
49
-
4.3.4
SNMP
You can set up SNMP Agent and SNMP Trap on this page.
Parameters
Description
SNMP v1/v2 Enable
Enable SNMP v1/v2.
SNMP Port
Set the destination port. Default is
161
.
Read Community
Key-in passwords in the Community Name field. Default is
public
.
SNMP Writing
Select the checkbox to enable SNMP Write-in.
Write Community
Key-in passwords in the Community Name field. Default is
private
.
Parameters
Description
SNMP v3 Enable
Enable SNMP v3.
User Name
The name is SNMP v3 command.
Type
There are two types:
Read Only
,
Read and Write
.
Authorization Type
There are two types:
MD5
and
SHA
.
Authorization
Password
The password of authorization type. Use MD5 or SHA.
Private Type
There are two types:
No
and
DES
.
