8
4.1 Logging on to the Console
Once the terminal has been connected to the device, power on the Industrial
Managed PoE+ Switch and the terminal will display “running testing procedures”.
Then, the following message asks to log in user name and password as shown
in Figure 4-3. Please enter the factory default user name
“admin”
and password
“admin”
.
Username:
admin
Password:
admin
Figure 4-3:
Console Login Screen
The user can now enter commands to manage the Managed Switch. For a detailed
description of the commands, please refer to the following chapters.
Note
1. For security reason,
please change and memorize the new
password after this first setup
.
2. Only accept command in lowercase letter under console inter
-
face.
4.2 Configuring IP Address
The Industrial Managed PoE+ Switch is shipped with default IP address shown
below:
IP Address:
192.168.0.100
Subnet Mask:
255.255.255.0
