2 Mega-pixel 35M IR Outdoor Box PoE IP Camera
ICA-HM351
46
This model comes with Planet easy DDNS. When this function is enabled, DDNS hostname
will appear automatically. User doesn’t go to
3.5.5 PPPoE
PPPoE stands for Point to Point Protocol over Ethernet
A standard builds on Ethernet and Point-to-Point network protocol. It allows Internet camera to
connect to Internet with xDSL or cable connection; it can dial up your ISP and get a dynamic IP
address. For more PPPoE and Internet configuration, please consult your ISP.
It can directly connect to the xDSL; however, it should be set up in a LAN environment to
program the PPPoE information first, and then connect to the xDSL modem. Power it on again
to enable device dial on to the ISP for connecting to the WAN through the xDSL modem.
The procedures are:
• Connect to a LAN by DHCP or Fixed IP
• Access the device by entering
Setting
Network
PPPoE
as shown below:
PPPoE
To enable or disable the PPPoE service here.
User Name
Type the user name for the PPPoE service which is provided by ISP.
Password
Type the password for the PPPoE service which is provided by ISP.
IP Address / Subnet
Mask / Gateway
Shows the IP information got from PPPoE server site.