background image

 

3.5.2.  DDNS server 

 

Stands for Dynamic Domain Name Server 

The device supports DDNS If your device is connected to xDSL directly, you might need this 
feature. However, if your device is behind a NAT router, you will not need to enable this feature. 
Because DDNS allows the device to use an easier way to remember naming format rather than an 
IP address. The name of the domain is like the name of a person, and the IP address is like his 
phone number. On the Internet we have IP numbers for each host (computer, server, router, and 
so on), and we replace these IP numbers to easy remember names, which are organized into the 
domain name. As to xDSL environment, most of the users will use dynamic IP addresses. If users 
want to set up a web or a FTP server, then the Dynamic Domain Name Server is necessary. For 
more DDNS configuration, please consult your dealer. 

Your Internet Service Provider (ISP) provides you at least one IP address which you use to 
connect to the Internet. The address you get may be static, meaning it never changes, or dynamic, 
meaning it’s likely to change periodically. Just how often it changes, depends on your ISP. A 
dynamic IP address complicates remote access since you may not know what your current WAN 
IP address is when you want to access your network over the Internet. The solution to the dynamic 
IP address problem comes in the form of a dynamic DNS service.   

The Internet uses DNS servers to lookup domain names and translates them into IP addresses. 
Domain names are just easy to remember aliases for IP addresses.    A dynamic DNS service is 
unique because it provides a means of updating your IP address so that your listing will remain 
current when your IP address changes. There are several excellent DDNS services available on 
the Internet and best of all they’re free to use. One such service you can use is www.DynDNS.org. 
You’ll need to register with the service and set up the domain name of your choice to begin using it. 
Please refer to the home page of the service for detailed instructions or refer to Appendix E for 
more information.   

 

 

 

 41

Содержание ICA-HM120






























































































Отзывы: