2.4 Initial Utility Installation
This chapter shows how to quick set up your PT Internet Camera. The PT Internet Camera is with
the default settings. However to help you find the networked camera quickly the windows
utility-IPWizard can search the cameras in the network that shall help you to configure some basic
setting before you started advanced management and monitoring.
1. Insert the bundled CD into the CD-ROM drive to launch the autorun program. Once completed,
a welcome menu screen will appear. Please click your IP camera model name to next page.
2. Click the “IPWizard” hyperlink; you will see the InstallShield Wizard dialog box as below.
NOTE:
If the welcome screen does not appear, click “Start” at the taskbar. Then, select
“Run” and type “D:\Utility\IPWizard\setup.exe”, assume D is your CD-ROM drive.
3. The “Welcome to the InstallShield Wizard for IPWizard” will display on the screen and click
“Next” to continue.
13