2.2.2 Rear Panel
Factory Default Reset
LAN Socket
Audio Output Jack
DC Power Jack
Audio Output Jack
Audio-out Jack allows this device to output audio or alerting sound.
The input power is 12VDC.
DC Power Jack
NOTE
Only use the power adapter supplied with PT Internet
Camera. Otherwise, the product may be damaged.
The LAN socket is a RJ-45 connector for connections to 10Base-T
Ethernet or 100Base-TX Fast Ethernet cabling. This Ethernet port
built N-Way protocol can detect or negotiate the transmission speed of
the network automatically. Please use Category 5 “straight through”
cable to connect the PT Internet Camera to a 100Mbps Fast Ethernet
network switch or hub.
LAN Socket
NOTE
If you need to connect the PT Internet Camera to PC or
notebook directly, you should use cross over cable instead.
Factory Default Reset This button is hidden in the pinhole. Please refer to the Appendix A in
manual for more information.
9