2.2 Physical Details
Identification of ICA-350 cables
Video Output Connector (BNC port)
The ICA-350 also provides composite video output. User can use
BNC video cable to connect the ICA-350 with a TV monitor or
DVR.
Power Connector (for ICA-350)
The input power is 12VDC. It supply two adapters that one for
heater and the other for camera.
NOTE:
Supplies the power to the ICA-350 with the power adapter
included in package.
RS-485 (Black: D- / Red: D+)
Connect to a Pan/Tilt scanner unit.
This connector is built inside the ICA-350 housing.
NOTE:
The RS-485 of ICA-350 is master that can control
external scanner.
RJ-45 LAN Connector
For connect a LAN cable to your Hub/Switch.
The LAN port is a RJ-45 connector for connections to 10Base-T
Ethernet or 100Base-TX Fast Ethernet cabling. This Ethernet port
built N-Way protocol can detect or negotiate the transmission
speed of the network automatically. Please use Category 5
“straight” cable to connect the ICA-350 to a 100Mbps Fast
Ethernet network switch or hub.
NOTE:
In case you need to connect the device to PC or notebook
directly, you should use a cross-over cable instead.
Power Connector (for heater)
Connect to DC 12V power adapter.
Line in (audio in)
*hardware version 2
Connect an audio input source to the ICA-350.
Line out (audio out)
*hardware version 2
Connect a loud speaker to the ICA-350. This function is for voice
alerting and two-way audio.
8