Planet ICA-302, Руководство пользователя, Страница: 31 / 82

Network Screen
You may configure Network setting such as IP address, DHCP, DDNS and
PPPoE in the Network setting page.
Network screen
Data - Network Screen
Network Settings
DHCP “DHCP OFF” is default network setting of the Network Camera, if
users choose “DHCP ON” when a ICA-302 is joined into the
LAN, it will issue the DHCP packets to request an IP address
that is dynamically assigned by the DHCP server. If it can not
get a DHCP address on a limited tries, the ICA-302 will assigned
a default IP address as the default IP address.
IP address,
Subnet mask,
Default
gateway,
Primary DNS,
Secondary
DNS These parameters allow users to setup the IP address assigned
by ISP. Your ISP should provide all the information requied for
Internet access.
Note: User need to reboot the IC-302 to make this setting to
take effect.
HTTP Port 1,
HTTP Port 2 Users could assign the port number of http protocol, and the
WAN users should follow the port number to login.
27