User’s Manual of ICA-2500
11
Chapter 3. Initial Utility Installation
This chapter shows how to quick set up your Internet camera. The Internet camera is with the
default settings for the first time power on.
Default IP: DHCP Client OR 192.168.0.20 (if NO DHCP server existed in the network)
Username: admin
Password: admin
However, if you are not familiar with network setting and to help you find the networked Internet
camera quickly the windows utility
PLANET IP Wizard II
can search the cameras in the network
that shall help you to configure some basic setting before you started advanced management and
monitoring.
1. Insert the bundled CD into the CD-ROM drive to launch the auto-run program. Once
completed, a welcome menu screen will appear.
2. Click the “IP Wizard II” hyperlink; you will see the dialog box as below.
NOTE:
If the welcome screen does not appear, click “Start” at the taskbar. Then, select
“Run” and type “D:\Utility\IPWizard II\setup.exe”, assume D is your CD-ROM drive.
3. The “Welcome to the InstallShield Wizard for PLANET IP Wizard II” prompt will display on the
screen and click “
Next
” to continue.
