Planet GSW-2416SF Скачать руководство пользователя страница 6

Страница: 6 / 54

2. HARDWARE DESCRIPTION

This product provides both Copper and Fiber connecter at same switch – 24 Ports TP and 16 Ports SFP (shared with Port

#9 to 24), and automatically distinguishes the speed of incoming connection.

This section describes the hardware features of GSW-2416SF. For easier management and control of the Switch,

familiarize yourself with its display indicators, and ports. Front panel illustrations in this chapter display the unit LED

indicators. Before connecting any network device to the GSW-2416SF, read this chapter carefully.

2.1 Front Panel

The Front Panel of the GSW-2416SF Web Smart Ethernet Switch consists of 24x Auto-Sensing 10/100/1000Mbps

Ethernet RJ-45 Ports and 16x SFP(Small Form-factor Pluggable) Ports. The LED Indicators are also located on the front

panel of the GSW-2416SF. And one console port at Front panel for switch management.

Figure 2-1:

GSW-2416SF Switch front panel

2.1.1 LED indicators

System

LED

Color

Function

PWR

Green

Lights to indicate that the Switch has power.

Per 10/100/1000Mbps port

LED

Color

Function

1000

LNK/ACT

Green

Lights to indicate that the Switch is successfully connecting to the network at
1000Mbps.

Blinks to indicate the Switch is receiving or sending data.

100

LNK/ACT

Amber

Lights to indicate that the Switch is successfully connecting to the network at
100Mbps.

Blinks to indicate the Switch is receiving or sending data.

Per SFP Interface

LED

Color

Function

SFP

LNK/ACT

Green

Lights to indicate that the Switch is successfully connecting to the network at
1000Mbps through SFP interface.

Blinks to indicate the Switch is receiving or sending data.

2.2 Rear Panel

The rear panel of the GSW-2416SF indicates an AC inlet power socket, which accepts input power from 100 to 240V AC,
50-60Hz, and 1A max. And one I/O power switch at rear panel for power management.

100~240V
AC

50/60H
z

OFF

POWER

Figure 2-2:

GSW-2416SF Switch rear panel

EM-GSW2416SFv1

- 6 -

Содержание GSW-2416SF























































Результаты поиска

Содержание GSW-2416SF

Отзывы:

Похожие инструкции для GSW-2416SF

Бренды по названию

Популярные бренды

Planet GSW-2416SF, Руководство пользователя

Результаты поиска

Содержание GSW-2416SF

Отзывы:

Похожие инструкции для GSW-2416SF

Бренды по названию

Популярные бренды