Planet GS-4210-16P2S Скачать руководство пользователя страница 252

Страница: 252 / 431

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S

252

4.9.2.3 802.1X Port Setting

This page allows you to configure the IEEE 802.1X Port Setting. The 802.1X Port Setting screens in

Figure 4-9-9

and

Figure

4-9-10

appear.

Figure 4-9-9:

802.1X Port Setting Page Screenshot

The page includes the following fields:

Object

Description

•

Port

Select port for this drop down list.

•

Mode

If NAS is globally enabled, this selection controls the port's authentication mode.

The following modes are available:



No Authentication



Authentication



Force Unauthorized



In this mode, the switch will send one EAPOL Failure frame when the
port link comes up, and any client on the port will be disallowed network

access.



Force Authorized

In this mode, the switch will send one EAPOL Success frame when the

port link comes up, and any client on the port will be allowed network

access without authentication.

•

Reauthentication
Enable

If checked, successfully authenticated supplicants/clients are reauthenticated

after the interval specified by the Reauthentication Period. Reauthentication for

802.1X-enabled ports can be used to detect if a new device is plugged into a

Содержание GS-4210-16P2S
















































































































































































































































































































































































































































Результаты поиска

Содержание GS-4210-16P2S

Отзывы:

Planet GS-4210-16P2S, Руководство пользователя, Страница: 252 / 431

Результаты поиска

Содержание GS-4210-16P2S

Отзывы: