Planet GS-4210-16P2S Скачать руководство пользователя страница 198

Страница: 198 / 431

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S

198

The page includes the following fields:

Object

Description

•

VLAN ID

Display the current VLAN ID.

•

Port Mask

Display the current port mask.

4.7.4.6 MLD Forward All

This page provides MLD Forward All. The Forward All screen in

Figure 4-7-33

appears.

Figure 4-7-33:

Forward All Setting Page Screenshot

The page includes the following fields:

Object

Description

•

VLAN ID

Select VLAN ID for this drop down list to assign MLD membership.

•

Port

The switch port number of the logical port.

•

Membership

Select MLD membership for each interface:

Forbidden:

Interface is forbidden from automatically joining the MLD via MVR.

None:

Interface is not a member of the VLAN. Packets associated with

this VLAN will not be transmitted by the interface.

Static:

Interface is a member of the MLD.

Button

: Click to apply changes.

Содержание GS-4210-16P2S
















































































































































































































































































































































































































































Результаты поиска

Содержание GS-4210-16P2S

Отзывы:

Planet GS-4210-16P2S, Руководство пользователя, Страница: 198 / 431

Результаты поиска

Содержание GS-4210-16P2S

Отзывы: