User’s Manual of GSD-800S / GSD-802S / GSD-802PS
4.12.5 Ping
Use this screen to tell the switch to send a Ping request to a specified IP address. You can use this to check whether the
switch can communicate with a particular IP station. Once you click the Apply button, the switch will send
n
pings and the
results will be displayed below the configurable data.
Figure 4-57
Ping function screen
The Ping Parameters includes the following fields:
•
Target IP Address
Enter the IP address of the station you want the switch to ping. The initial value is
blank. The IP Address you enter is not retained across a power cycle.
•
Count
Number of echo requests to send.
•
Time Out (in secs)
Timeout in milliseconds to wait for each reply.
After field the parameter and press “
Apply
” to execute the Ping function. The Ping result shows at the next table. As the
Figure 4-58 screen appears.
Figure 4-58
Ping Result screen