User’s Manual of GSD-800S / GSD-802S / GSD-802PS
4.9.2 DSCP QoS Mode
DiffServ Code Point (DSCP)
－
is the traffic prioritization bits within an IP header that are encoded by certain applications
and/or devices to indicate the level of service required by the packet across a network.
The
DSCP Configuration
page provides fields for defining output queue to specific DSCP fields.
Select the QoS mode to DSCP, the DSCP to queue mapping configuration page appears, as the Figure 4-40 shows.
Figure 4-40
DSCP QoS Configuration screen
The page includes the following fields:
•
Prioritize Traffic
The draw menu allows customization of DSCP to Traffic classifiers. Total 5
selections for the Prioritize Traffic.
•
Custom –
Manual mapping the DSCP to the 4-level queues. Setup at the
next table.
•
All Low Priority -
mapping all IP DCSP header packets to
Queue 0
•
All Normal Priority -
mapping all IP DCSP header packets to
Queue 1
•
All Medium Priority -
mapping all IP DCSP header packets to
Queue 2
•
All High Priority -
mapping all IP DCSP header packets to
Queue 3
•
DSCP Value
( 0..63)
The values of the IP DSCP header field within the incoming packet.
•
Priority
The traffic forwarding queue to which the DSCP is mapped. Four traffic priority
queues are supported.
The queue to which packets with the specific DSCP value is assigned. The values
are low,Normal,Medium and High.
•
Low = Queue 0
•
Normal = Queue 1
•
Medium = Queue 2
•
High = Queue 3
