User’s Manual of FSD-804PS
2.6.2 As a department / workgroup PoE Switch
Providing up to 4 PoE, in-line power interface, the Switch can easily build a power central-controlled IP phone system,
IP Camera system, AP group for the enterprise. For instance, 4 camera / AP can be easily installed around the corner
in the company for surveillance demands or build a wireless roaming environment in the office. Without the
power-socket limitation, the switch makes the installation of cameras or WLAN AP more easily and efficiently.
Figure 2-8
PoE Switch connection
2.7 Power over Ethernet Powered Device
3~5 watts
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other Ethernet/non-Ethernet
end-devices to the central where UPS is installed for un-interrupt power system
and power control system.
6~12 watts
Wireless LAN Access Points
Museum, Sightseeing, Airport, Hotel, Campus, Factory, Warehouse can install
the Access Point any where with no hesitation
10~12 watts
IP Surveillance
Enterprise, Museum, Campus, Hospital, Bank, can install IP Camera without
limits of install location – no need electrician to install AC sockets.
3~12 watts
PoE Splitter
PoE Splitter split the PoE 48V DC over the Ethernet cable into 5/9/12V DC
power output. It frees the device deployment from restrictions due to power
outlet locations, which eliminate the costs for additional AC wiring and reduces
the installation time.
- 15 -