User’s Manual of FSD-804PS
2.5 Rack Mounting (Optional Rack Kits)
To install the Switch in a 10-inch or 19-inch standard rack, PLANET provides the optional rack mount kits
RKE-10A
/
RKE-10B
for different need. Follow the instructions described below.
Step1:
Place your Switch on a hard flat surface, with the front panel positioned towards your front side.
Step2:
Attach a rack-mount bracket to each side of the Switch with supplied screws attached to the package.
Figure 2-5
shows how to attach brackets to one side of the Switch.
Figure 2-5
Attaching the brackets to the Switch.
You must use the screws supplied with the mounting brackets. Damage caused to the parts by
using incorrect screws would invalidate the warranty.
Step3:
Secure the brackets tightly.
Step4:
Follow the same steps to attach the second bracket to the opposite side.
Step5:
After the brackets are attached to the Switch, use suitable screws to securely attach the brackets to the rack, as
shown in
Figure 2-6
.
Figure 2-6
Mounting the Switch in a Rack
Step6:
Proceeds with the steps 4 and steps 5 of
session 2.4 Desktop Installation
to connect the network cabling and
supply power to your Switch.
- 13 -
