User Manual of FRT-405N
50
5.3.4 WDS
WDS (Wireless Distribution System)
allows access points to communicate with one another wirelessly in a
standardized way. It can also simplify the network infrastructure by reducing the amount of cabling required.
Basically the access points will act as a client and an access point at the same time.
WDS is incompatible with WPA. Both features cannot be used at the same time. A WDS link is bi-directional,
so the AP must know the MAC address of the other AP, and the other AP must have a WDS link back to the
AP.
Dynamically assigned and rotated encryption key are not supported in a WDS connection. This means that
WPA and other dynamic key assignment technologies may not be used. Only Static WEP keys may be used
in a WDS connection, including any STAs that are associated with a WDS repeating AP.
Enter the MAC address of the other APs that you want to link to and click enable. Supports up to 4 point to
multipoint WDS links, check Enable WDS and then enable on the MAC addresses.
WDS Mode:
There are four options, including
Disable
,
Lazy Mode
,
Bridge Mode
, and
Repeater Mode
.
Disable
Select Disable to disable the WDS mode.
Lazy Mode
Содержание FRT-405N
Страница 1: ...User Manual of FRT 405N 1 ...
Страница 28: ...User Manual of FRT 405N 28 Figure 5 2 Login Window ...
Страница 75: ...User Manual of FRT 405N 75 ...
Страница 88: ...User Manual of FRT 405N 88 Figure 6 9 Connected to a Network ...