background image

 

 

Trademarks 

Copyright 

 PLANET Technology Corp. 2002. 

Contents subject to revision without prior notice. 
PLANET  is  a  registered  trademark  of  PLANET  Technology 
Corp. All other trademarks belong to their respective owners. 

Disclaimer 

PLANET Technology does not warrant that the hardware will 
work  properly  in  all  environments  and  applications,  and 
makes no warranty and representation, either implied or ex-
pressed,  with  respect  to  the  quality,  performance, 
merchantability, or fitness for a particular purpose. 

PLANET  has  made  every  effort  to  ensure  that  this  User

Manual  is accurate; PLANET  disclaims liability for any  inac-
curacies or omissions that may have occurred. 

Information in this User

s Manual is subject to change without 

notice  and  does not represent a commitment  on  the  part  of 
PLANET.  PLANET  assumes  no  responsibility  for  any  inac-
curacies  that  may  be  contained  in  this  User

s  Manual. 

PLANET  makes  no  commitment  to  update  or  keep  current 
the information in this User

s Manual, and reserves the right to 

make  improvements  to  this  User

s  Manual  and/or  to  the 

products described in this User

s Manual, at any time without 

notice. 

If  you  find  information  in  this  manual  that  is  incorrect,  mis-
leading, or incomplete, we would appreciate your comments 
and suggestions. 

 

 

 

 

 

- 2 - 

Содержание FNSW-3200























Отзывы: