0B
Chapter 1 Introduction
PLANET's ENW-9503A is 10/100Mbps based 32-bit Peripheral Component Interconnect
(PCI) Local Bus Ethernet adapter designed to address high-performance system application
requirements. The bus-master architecture provides high data throughput in the system and
low CPU and system bus utilization. The adapter provides Auto-Negotiation automatically
detects and determines the optimal inter-operation mode with other devices. The
ENW-9503A support both 10Mbps and 100Mbps data rates with UTP-CAT5 or STP cable.
LED indicators are also provided for quick monitoring of busy, link collision and speed
indication. Also, you can operate PLANET's Fast Ethernet Adapters in Full-duplex mode.
Featured with Wake-On-LAN, the ENW-9503A helps remote awake on LAN to offer an easy
software update, data backup even in the office off time. Moreover, PLANET ENW-9503A
also supports RPL and PXE BootROM for easy diskless workstation installation.
5B
1.1 Package Content
Check that your package contains the following items:
9
1 x 10/100Mbps Ethernet Adapter
9
1 x CD-ROM Manual / Driver
9
1 x One WOL cable (ENW-9503A only)
Please contact the seller if any of the items is missing or damaged.
Be sure to retain your proof of purchase, as it is required to receive warranty
service.
6B
1.2 Features
¾
Complies to IEEE 802.3 CSMA/CD, 100Base-TX, and 10Base-T Standard
¾
Complies with PCI local bus specification. (Revision 2.2)
¾
Provides Full-duplex Ethernet operation for both 10Base-T and 100Base-TX expand the
bandwidth up to 20/200Mbps.
¾
ENW-9503A with Wake-On-LAN power connector for WOL PC connection, Magic Packet remote
wake-up.
¾
Onboard remote BootROM socket for remote workstation boot up on ENW-9503A
7B
1.3 Gathering Tools and Documentations
To install the adapter, you need the following items:
9
A suitable screw driver
9
Your operating system documentation
9
Your system unit documentation, including any service documentation
