Planet ADE-4400, Руководство пользователя

Страница: 51 / 65

Field Description
Schedule Mode You can choose strict prior or WFQ (4:3:2:1) .
Source IP The IP address of the source data packet.
Source Mask The subnet mask of the source IP address.
Destination IP The IP address of the destination data packet.
Destination Mask The subnet mask of the destination IP address.
Source Port
The port of the source data packet.
Destination Port The port of the destination data packet.
Protocol
The protocol responds to the IP QoS rules. You can choose TCP ,
UDP , or ICMP .
Physical Port The LAN interface responds to the IP QoS rules.
Set priority
The priority of the IP QoS rules. P0 is the highest priority and P3 is
the lowest.
IP Precedence
You can choose from 0 to 7 define the priority in the ToS of the IP
data packet.
IP ToS
The type of IP ToS for classifying the data package
You can choose
Normal Service , Minimize Cost , Maximize
Reliability , Maximize Throughput , or Minimize Delay .
802.1p You can choose from 0 to 7.
delete Select a row in the QoS rule list and click it to delete the row.
delete all Select all the rows in the QoS rule list and click it to delete the rows.
3.6.5 SNMP
Choose Advance > SNMP , the page shown in the following figure appears. You can
configure the SNMP parameters.
The following table describes the parameters of this page:
Field Description
Enable SNMP
Select it to enable SNMP function. You need to enable
SNMP, and then you can configure the parameters of
this page.
Trap IP Address
Enter the trap IP address. The trap information is sent
to the corresponding host.
Community name
(read-only) The network administrators must use this password to
read the information of this router.
Community name
(write-only) The network administrators must use this password to
configure the information of the router.
51