3.6.4 QoS
Choose
Advance > QoS
, the page shown in the following figure appears. Entries in the
QoS Rule List
are used to assign the precedence for each incoming packet based on
physical LAN port, TCP/UDP port number, source IP address, destination IP address and
other information.
Step 1
: Enable IP QoS and click
Apply
to enable IP QoS function.
Step 2
: Click
add rule
to add a new IP QoS rule.
The page shown in the following figure appears.
The following table describes the parameters and buttons of this page:
Field
Description
IP QoS
Select to enable or disable IP QoS function. You need to enable IP
QoS if you want to configure the parameters of this page.
QoS Policy
You can choose
stream based
,
802.1p based
, or
DSCP based
.
50
Содержание ADE-4400
Страница 1: ...1 ADSL 2 2 4 port Router ADE 4400...