Planet ADE-4400, Руководство пользователя

Страница: 47 / 65

The following table describes the parameters and buttons of this page:
Field Description
Enable Select it to use static IP routes.
Destination Enter the IP address of the destination device.
Subnet Mask Enter the subnet mask of the destination device.
Next Hop
Enter the IP address of the next hop in the IP route to
the destination device.
Metric The metric cost for the destination.
Interface The interface for the specified route.
Add Route
Click it to add the new static route to the Static Route
Table .
Update
Select a row in the Static Route Table and modify the
parameters. Then click it to save the settings
temporarily.
Delete Selected
Select a row in the Static Route Table and click it to
delete the row.
Show Routes
Click it, the IP Route Table appears. You can view a list
of destination routes commonly accessed by your
network.
Static Route Table A list of the previously configured static IP routes.
Click
Show Routes , the page shown in the following figure appears. The table shows a
list of destination routes commonly accessed by your network.
3.6.2.2 IPv6 Static Route
Click IPv6 Static Route in the left pane, the page shown in the following figure appears.
This page is used to configure the IPv6 routing information. You can add or delete IP
routes.
47