Setup
If you can't connect
If the ADE-4300/ADW-4300 does not respond, check the following:
•
The ADE-4300/ADW-4300 is properly installed, LAN connection is OK,
and it is powered ON. You can test the connection by using the "Ping"
command:
•
Open the MS-DOS window or command prompt window.
•
Enter the command:
ping 192.168.0.1
If no response is received, either the connection is not working, or your
PC's IP address is not compatible with the ADE-4300/ADW-4300's IP
Address. (See next item.)
•
If your PC is using a fixed IP Address, its IP Address must be within the
range 192.168.0.2 to 192.168.0.254 to be compatible with the ADE-
4300/ADW-4300's default IP Address of 192.168.0.1. Also, the
Network
Mask
must be set to 255.255.255.0. See
Chapter 4 - PC Configuration
for details on checking your PC's TCP/IP settings.
•
Ensure that your PC and the ADE-4300/ADW-4300 are on the same
network segment. (If you don't have a router, this must be the case.)
•
Ensure you are using the wired LAN interface. The Wireless interface
can only be used if its configuration matches your PC's wireless set-
tings. (ADW-4300 only)
Setup Wizard
The first time you connect to the ADE-4300/ADW-4300, the Setup Wizard will run
automatically. (The Setup Wizard will also run if the ADE-4300/ADW-4300's default
settings are restored.)
1. Step through the Wizard until finished.
•
You need the data supplied by your ISP. Most connection methods require some
data input.
•
The common connection types are explained in the following table.
2. On the final screen of the Wizard, run the test and check that an Internet connec-
tion can be established.
3. If the connection test fails:
•
Check all connections, and the front panel LEDs.
•
Check that you have entered all data correctly.
13
Содержание ADE-4300A
Страница 1: ...ADSL 2 2 VPN Firewall Router ADE 4300A B ADW 4300A B User s Manual...
Страница 57: ...ADE 4300 ADW 4300 User Guide 52...
Страница 60: ...Operation and Status 55...