Planet 85M Powerline to Ethernet Bridge with 4-Port Switch PL-420, Руководство пользователя

Страница: 9 / 22

Chapter 2: Installation
Overview
The installation of 85M Powerline Ethernet Switch will only take minutes. No
need to set up long wires through out the house, just simply install the utility, and
physically plug the power code into the device and wall outlet, then to connect
RJ-45 to the computer. Users can select to adjust its security functions and the
platform of the network after the installation. For further assistance, please read
our Frequently Asked Questions section.
Running the InstallShield Wizard
Please verify that no other Powerline Management Utilities are installed before
installing this product. If other utilities were installed, uninstall them and restart
before installing this software.
To install, insert the Windows OS Configuration Utility (Setup Utility CD) into the
computer's CD-ROM drive. The main page shall pop up, then to press the link to
install the software. Alternatively this can also be done manually by double
clicking the setup.exe file on the CD.
Once the software is loaded it will display a dialog as following:
9