Planet 802.11n Wireless PCI Adapter WNL-9330 Скачать руководство пользователя страница 6

Страница: 6 / 61

Chapter 1: Introduction

Complying with the most innovative 802.11n technology, PLANET delivers a reliable and cost

effective solution - WNL-9330. WNL-9330 is a PCI 2.2 wireless adapter which integrates one

transmit channel and two concurrent receive channels; thus, it supports up to 150Mbps upload

and 300Mbps download data rate. Using 2.4GHz frequency band; it is backward compatible

with 802.11b and 802.11g for users to create a new wireless environment based on existing

wireless network.

The WNL-9330 provides a feature rich wireless connectivity. It supports WMM to maintain

stable multimedia quality by granting high priority for such packets. For security, the WNL-9330

supports the most advanced mechanism, WPA2, to protect the information exchange through

wireless. Moreover, in order to simplify the security configurations, WPS (Wi-Fi Protected

Setup) is enhanced in WNL-9330. This design helps inexperienced users to secure their

wireless network quickly and easily.

The WNL-9330 supports most popular operating systems, Windows 2000 / XP / Vista. With

advanced features and high speed capability, the WNL-9330 gives users the greatest

performance anytime anywhere.

1-1 Features

2.4GHz ISM band, unlicensed operation

Compliant with IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0)

Support PCI v2.1/2.2 standard

Antenna: two external antennas with one TX and two RX

Provides up to 300Mbps download and 150Mbps upload data rate

Supports Wi-Fi Protected Setup (WPS)

Supports WEP , WPA, WPA2 high-level security mechanisms

Supports WMM (Wi-Fi Multi-Media) function to meet the multi-media data bandwidth

requirement. (the connected AP and the application must support WMM as well)

Supports Software AP mode

QoS function: Control the bandwidth required for different applications

Supports most popular operating systems including Windows 2000 , XP and Vista

Содержание 802.11n Wireless PCI Adapter WNL-9330






























































Результаты поиска

Содержание 802.11n Wireless PCI Adapter WNL-9330

Отзывы:

Похожие инструкции для 802.11n Wireless PCI Adapter WNL-9330

Бренды по названию

Популярные бренды

Planet 802.11n Wireless PCI Adapter WNL-9330, Руководство пользователя

Результаты поиска

Содержание 802.11n Wireless PCI Adapter WNL-9330

Отзывы:

Похожие инструкции для 802.11n Wireless PCI Adapter WNL-9330

Бренды по названию

Популярные бренды