– 1 –
– 2 –
– 3 –
– 4 –
1. Package Contents
l
1 x WNAP-1120/WNAP-1120PE
l
1 x 5V1A Power Adapter
l
1 x User’s Manual CD
l
2 x 3dBi External Antenna
l
1 x Ethernet Cable
l
1 x Quick Installation Guide
Note
1. If any of the above items are missing or
damaged, contact your local dealer for
support.
2. In the following information, the terms of
“11n AP” will mean WNAP-1120/ WNAP-
1120PE unless it is specified.
1. Please Connect bundled antennas to the two SMA connec-
tors.
2. Please Connect the LAN PC or network devices to 11n AP
LAN port with RJ-45 Ethernet cable.
3. Please Connect power adapter to the power socket on
11n AP, and plug the other end of the power pack into
an electrical outlet.
2. Physical Installing
SMA Connectors
WPS/Reset
LAN Port
5V Power Socket
SMA Connectors
(EX: PoE for WNAP-1120PE only)
Note
1. ONLY use the power adapter supplied with
11n AP. Otherwise, the product may be
damaged.
2. For the power supply of
WNAP-1120PE
,
you could use either IEEE 802.3af PSE
device or 5VDC Adapter. Please do not use
5V adapter and PSE devices at the same
time. It may damage the 11n AP devices.
4. After the hardware connection done, please refer to
below for the configuration.
