Planet Networking & Communication WNL-U554 Скачать руководство пользователя страница 7

Страница: 7 / 58

Chapter 1: Introduction

WNL-U554 wireless USB adapter adapts IEEE 802.11n technology compatible with IEEE

802.11b and IEEE 802.11g, offering a reliable and cost effective solution. With the interface of

USB 2.0 that integrates one transmit channel and one concurrent receive channel, the speed

could be up to 150Mbps upload and download data rate for extending wireless coverage

range.

The WNL-U554 provides advanced security, not only 64/128-Bits WEP, but also WPA, WPA2

and LEAP encryption. Moreover, in order to simplify the security configurations, WPS (Wi-Fi

Protected Setup) offers a convenient and fast method for users as well. Besides, QoS-WMM

maintains the high priority transition quality for such multimedia packets.

WNL-U554 supports Windows base systems, included 2000, XP and Vista. With high speed

capability, users get higher wireless transmission in anytime, anywhere.

1-1 Features

2.4GHz ISM band, unlicensed operation

Compliant with IEEE 802.11b, IEEE 802.11g, IEEE 802.11n

USB 2.0 attached interface

WPS hardware button supported

Antenna: Internal two Antennas with one TX and one RX

Provides up to 150Mbps download and upload data rate

Supports Wi-Fi Protected Setup (WPS)

Supports WEP 64/128, WPA, WPA-PSK, WPA2, WPA2-PSK, LEAP

Cisco

CCX

support

Supports QoS-WMM (WiFi Multi-Media) function / WMM-PS

Supports Software AP mode

Supports most popular operating systems including Windows 2000 , XP , and Vista

Содержание WNL-U554



























































Результаты поиска

Содержание WNL-U554

Отзывы:

Бренды по названию

Популярные бренды

Planet Networking & Communication WNL-U554, Руководство пользователя

Результаты поиска

Содержание WNL-U554

Отзывы:

Бренды по названию

Популярные бренды