User’s Manual of WGSD-10020 Series
Parameters:
<port_list>
: Port list or 'all', default: All ports
enable
: Enable LLDP reception and transmission
disable
: Disable LLDP
rx
: Enable LLDP reception only
tx
: Enable LLDP transmission only
(default: Show LLDP mode)
Default Setting:
disable
Example:
Enable port1 LLDP function.
WGSD-10020HP:/>
lldp mode 1 enable
LLDP Optional TLV
Description:
Show or Set LLDP Optional TLVs.
Syntax:
LLDP Optional_TLV [<port_list>] [port_descr|sys_name|sys_descr|sys_capa|mgmt_addr] [enable|disable]
Parameters:
<port_list>
: Port list or 'all', default: All ports
port_descr
: Description of the port
sysm_name
: System name
sys_descr
: Description of the system
sys_capa
: System capabilities
mgmt_addr
: Master's IP address
(default: Show optional TLV's configuration)
enable
: Enables TLV
disable
: Disable TLV
(default: Show optional TLV's configuration)
Default Setting:
Description of the port: Enable
System name: Enable
Description of the system: Enable
452
Содержание WGSD-10020
