manualshive.com logo in svg

Planet Networking & Communication WGSD-10020, Руководство пользователя, Страница: 179 / 557

Поделиться
Скачать
Planet Networking & Communication WGSD-10020 Скачать руководство пользователя страница 179

User’s Manual of WGSD-10020 Series 

 

Object 

Description 

 

Tag Classification

 

Controls the classification mode for tagged frames on this port.   

Disabled

: Use default QoS class and DP level for tagged frames.   

Enabled

: Use mapped versions of PCP and DEI for tagged frames. 

 

(PCP, DEI) to (QoS 

class, DP level) 

Mapping

 

Controls the mapping of the classified (PCP, DEI) to (QoS class, DP level) values 

when Tag Classification is set to 

Enabled

. 

 

Buttons 

: Click to save changes. 

: Click to undo any changes made locally and revert to previously saved values. 

: Return to the previous page. 

 

 

4.9.4 Port Scheduler 

This page provides an overview of QoS Egress Port Schedulers for all switch ports. The Port Scheduler screen in 

Figure 4-9-4

 

appears. 

 

Figure 4-9-4

 QoS Egress Port Schedule page screenshot 

 

The page includes the following fields: 

Object 

Description 

 

Port 

The logical port for the settings contained in the same row. 

Click on the port number in order to configure the schedulers. 

 

179 

 

Содержание WGSD-10020














































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов