User’s Manual of UPOE-800G / UPOE-1600G
31
4.3.2 IP Configuration
This section provides the IP Configuration of Ultra PoE Managed Injector Hub as the screen in
Figure 4-3-2
appears.
Table
4-3-2
describes the IP Configuration object of Ultra PoE Managed Injector Hub.
Figure 4-3-2:
IP Configuration Web Page Screen
Object
Description
Allows to disable or enable the DHCP Client function of Ultra PoE Managed
Injector Hub.
DHCP Client
IP Address
Allows to input new IP Address of Ultra PoE Managed Injector Hub.
Subnet Mask
Allows to input new Subnet Mask Address of Ultra PoE Managed Injector Hub.
Default Gateway
Allows to input new Default Gateway Address of Ultra PoE Managed Injector Hub.
Apply
Press this button to take effect.
Reset
Press this button to reset IP Configuration to default mode.
Table 4-3-2:
Descriptions of the IP Configuration Objects Screen
If Ultra PoE Managed Injector Hub has not received IP address from DHCP server, then user still can
connect to the IP address before changing to DHCP client mode, or user can use Smart Discovery Utility to
find out what IP address set in the Ultra PoE Managed Injector Hub is currently.