Planet Networking & Communication SGSD-1022, Руководство пользователя, Страница: 442 / 688

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
442
Syntax
accounting commands level {default | list-name} no accounting commands level
level -The privilege level for executing commands. (Range: 0-15)
default -Specifies the default method list created with the aaa accounting commands command (page 4-100).
list-name - Specifies a method list created with the aaa accounting commands command.
Default Setting
None
Command Mode
Line Configuration
Example
Console(config)#line console
Console(config-line)#accounting commands 15 default
Console(config-line)#
aaa authorization exec
This command enables the authorization for Exec access. Use the no form to disable the authorization service.
Syntax
aaa authorization exec {default | method-name} group { | server-group} no aaa authorization exec {default |
method-name} default - Specifies the default authorization method for Exec access.
method-name - Specifies an authorization method for Exec access. (Range: 1-255 characters)
group -Specifies the server group to use. - - Specifies all hosts configure with the tacacs-server host
command described on page 4-93.
-server-group -Specifies the name of a server group configured with the aaa group server command described on 4-97.
(Range: 1-255 characters)
Default Setting
Authorization is not enabled
No servers are specified
Command Mode
Global Configuration
Command Usage
This command performs authorization to determine if a user is allowed to run an Exec shell.
The user must be authenticated before AAA authorization is enabled.
If this command is issued without a specified named method, the default method list is applied to all interfaces or lines
(where this authorization type applies), except those that have a named method explicitly defined.