Planet Networking & Communication SGSD-1022 Скачать руководство пользователя страница 439

Страница: 439 / 688

User’s Manual of SGSD-1022 / SGSD-1022P

SGSW-2840 / SGSW-2840P

439

Command Mode

Global Configuration

Command Usage

This command runs accounting for Exec service requests for the local console and Telnet connections.

Note that the default and method-name fields are only used to describe the accounting method(s) configured on the

specified RADIUS or servers, and do not actually send any information to the servers about the methods to

use.

Example

Console(config)#

aaa accounting exec default start-stop group

Console(config)#

aaa accounting commands

This command enables the accounting of Exec mode commands. Use the no form to disable the accounting service.

Syntax

aaa accounting commands level {default | method-name} start-stop group { | server-group} no aaa accounting

commands level {default | method-name} level -The privilege level for executed commands.

(Range: 0-15) default - Specifies the default accounting method for service requests.

method-name -Specifies an accounting method for service requests. (Range: 1-255 characters)

start-stop - Records accounting from starting point and stopping point.

group -Specifies the server group to use. - -Specifies all hosts configure with the tacacs-server host

command described on page 4-93.

-server-group -Specifies the name of a server group configured with the aaa group server command described on 4-97.

(Range: 1-255 characters)

Default Setting

Accounting is not enabled

No servers are specified

Command Mode

Global Configuration

Command Usage

The accounting of Exec mode commands is only supported by servers.

Note that the default and method-name fields are only used to describe the accounting method(s) configured on the

specified server, and do not actually send any information to the server about the methods to use.

Содержание SGSD-1022

















































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SGSD-1022

Отзывы:

Planet Networking & Communication SGSD-1022, Руководство пользователя, Страница: 439 / 688

Результаты поиска

Содержание SGSD-1022

Отзывы: