Planet Networking & Communication SGSD-1022, Руководство пользователя, Страница: 437 / 688

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
437
Console(config)#aaa group server radius tps
Console(config-sg-radius)#
server
This command adds a security server to an AAA server group. Use the no form to remove the associated server from the group.
Syntax
[no] server {index | ip-address}
index - Specifies a server index and the sequence to use for the group. (Range: RADIUS 1-5, 1)
ip-address -Specifies the host IP address of a server.
Default Setting
None
Command Mode
Server Group Configuration
Command Usage
When specifying the index for a RADIUS server, that server index must already be defined by the radius-server host
command (see page 4-88).
When specifying the index for a server, that server index must already be defined by the tacacs-server host
command (see page 4-93).
Example
Specify the group name for a list of RADIUS servers, and then specify the server to add to the group
Console(config)#aaa group server radius tps
Console(config-sg-radius)#server 10.2.68.120
Console(config-sg-radius)#
aaa accounting dot1x
This command enables the accounting of requested 802.1X services for network connections. Use the no form to disable the
accounting service.
Syntax
aaa accounting dot1x {default | method-name} start-stop group {radius | | server-group} no aaa accounting dot1x
{default | method-name}
default - Specifies the default accounting method for service requests.
method-name -Specifies an accounting method for service requests. (Range: 1-255 characters)
start-stop - Records accounting from starting point and stopping point.