Command Guide of MGSW-28240F
4.2.56.13 dot1x port-control
Command:
dot1x port-control auto | force-authorized | force-unauthorized | mac-based | multi |
single
dot1x
IEEE Standard for port-based Network Access Control
port-control
Sets the port security state.
auto
Port-based 802.1X Authentication
force-authorized
Port access is allowed
force-unauthorized
Port access is not allowed
mac-based
Switch authenticates on behalf of the client
multi
Multiple Host 802.1X Authentication
single
Single Host 802.1X Authentication
Default:
Force-authorized
Usage Guide:
To configure
Port-control
mode for 802.1X
Example:
To configure
Port-Based 802.1X(Auto)
mode for
GigabitEthernet X/X
.
Switch# configure terminal
Switch (config)#
interface GigabitEthernet X/X
Switch (config-if) #
dot1x port-control auto
4.2.56.14 dot1x radius-qos
Command:
dot1x radius-qos
dot1x
IEEE Standard for port-based Network Access Control
radius-qos
Enables/disables per-port state of RADIUS-assigned QoS.
Default:
Disable
Usage Guide:
To enable
RADIUS-assigned QoS
for 802.1X
Example:
To enable
RADIUS-assigned QoS
for
GigabitEthernet X/X.
-87-
Содержание MGSW-28240F
Страница 1: ...Command Guide of MGSW 28240F 1 ...