High Definition PoE/Non-PoE IP Phone
VIP-1000PT/VIP-1000T
- 30 -
4.3 SIP Account
4.3.1 Line 1
On this webpage, users can configure the information about SIP account 1, including the following 4
parts: Basic Setup, Audio Configuration, Supplementary Service Subscription and Advanced. The
following are the descriptions about these:
1) Basic Setup
Set the basic information provided by your VoIP Service Provider, such as phone number, account,
password, SIP proxy and so on.
Field Name
Description
Line Enable
Enable Line 1 or not.
Outgoing Call without
Registration
Enable Peer To Peer or not.
If enabled, line 1 will not send register request to SIP server;
In System Status, line 1 status is registered;
Line 1 can make calls out, but others cannot call line1.
Proxy Server
Fill in the IP address of your SIP server.
Outbound Server
Outbound Proxy IP or domain name.
Backup Outbound
Server
Backup outbound server IP or domain name.
Proxy port
The value of Proxy Port, the default value is 5060.
Outbound Port
The value of Outbound Port, the default value is 5060.
Backup Outbound Port The value of Backup Outbound Port, the default value is 5060.
