Planet Networking & Communication IGSW-24040T Скачать руководство пользователя страница 163

Страница: 163 / 521

User’s Manual of IGSW-24040T



Port

The logical port for the settings.



Filtering Group

The IP Multicast Group that will be filtered.

Buttons

: Check to delete the entry.

: Click to add a new entry to the Group Filtering table.

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

4.8.6 IGMP Snooping Status

This page provides IGMP Snooping status.

The status relate to the currently selected unit, as reflected by the page header. The IGMP Snooping Status screen in

Figure

4-8-9

appears.

Figure 4-8-9

IGMP Snooping Status Page Screenshot

163

Содержание IGSW-24040T










































































































































































































































































































































































































































































































































Результаты поиска

Содержание IGSW-24040T

Отзывы:

Planet Networking & Communication IGSW-24040T, Руководство пользователя, Страница: 163 / 521

Результаты поиска

Содержание IGSW-24040T

Отзывы: