User’s
Manual
of
ICA
‐
HM227W
46
Here are the descriptions of every setup item:
Item
Description
LAN
Select this option to assign an IP address to LAN port (or obtain an
address from DHCP server automatically).
Available options are:
‐
DHCP IPv4:
Obtain an IPv4 IP address from DHCP server on LAN
automatically.
‐
DHCP IPv4 / IPv6:
Obtain both IPv4 and IPv6 address from DHCP
server on LAN automatically.
‐
Static IPv4 / IPv6:
Assign an IPv4 / IPv6 address to IP camera
manually. If you don’t have a DHCP server on your local area
network, you must use this option to specify an IP address.
IP Address(IPv4): Input IPv4 IP address*
IP Address(IPv6): Input IPv6 IP address*
Prefix Length: Input IPv6 IP address’ prefix length (0-128)
Subnet Mask: Input subnet mask
Gateway: Input gateway address
Primary DNS: Input DNS server’s IP address
Secondary DNS: Input backup DNS server’s IP address, you
can leave this field blank.
*You can leave this field blank, if you only wish to use IPv4 or IPv6 IP
address.
‐
Enable UPnP Discovery:
Check this box to enable other devices on
network to discover the presence of this IP camera by UPnP. It’s
recommended to enable this function.
‐
Enable UPnP Port Mapping:
When UPnP is enabled, check this box
to enable UPnP’s port mapping.
PPPoE
Select this option to use PPPoE to connect to network. You have to input
PPPoE username and password assigned by network operator to get
connected.
HTTP Port
Input IP camera’s web connection port number here. When this port
number is changed, you need to change web browser’s port number you
used to connect to IP camera.
For example, IP camera’s IP address is 192.168.1.1, and if you changed
