background image

ICA-HM220W

ICA-HM220W

their respective owners. Copyright © 2010 PLANET Technology Corp.  All rights reserved.

PLANET Technology Corporation

11F, No. 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan, R.O.C.

Tel: 886-2-2219-9518

Fax: 886-2-2219-9528

Email: [email protected]

www.planet.com.tw

Quick Guide

Quick Guide

2011-AB5380-000

VERIFY THE CONTENTS INSIDE PACKAGE BOX

The package should contain the items plus ICA-HM220W. If any item is missing or damaged, please contact the seller immediately 

Power Adapter

CD-ROM

RJ-45

Antenna x 2

Camera Mounting Kit

Quick Installation Guide

Step 2 : Computer Network Setup

Use web browser (Internet Explorer 6.0 or above) to connect to 

192.168.0.20

 (type this 

address in the address bar of web browser). You’ll be prompted to input user name and 
password: 

admin / admin

.

Set your computer’s IP address to 192.168.0.x, where x is an integer between 1 to 254 
(except 20 where is being used for the camera by default). If you don’t know how to do 
this, please ask your network administrator, or refer to instructions on chapter 2.3.2 of 
user manual.

Step 4 : Install ActiveX Control

After the ActiveX control was installed, the first image will be displayed. You should be able to see the images captured from the camera in the 
web page now. For advanced configuration and setting such as P/T tour, wireless connection, please refer to instructions given in the CD-ROM 
user guide.

When you see this message, click 

Run

 to download Plug-in

Step 1 : Please follow the following instructions to set up the camera

Further Configuration

For detail configuration, please check user’s manual on the bundled CD.
If you have any other questions, please contact the dealer where you purchased this product or you can contact PLANET directly at the following email 
address: [email protected]

Plug the power adapter to wall socket and connect the 
power connector to the power jack located at the back of 
the IP camera.

Place  the  IP  camera  at  a  secure  place,  and  point  the 
camera to the place you wish to monitor. If you wish to 
hang the camera on the ceiling or wall, please use the 
tripod connector (located at the bottom of the IP camera 
as shown below) to secure the camera.

Step 3 : Login Prompt

After logged on, you should see the following messages, 
please click

 Download the latest ActiveX 

link to download Plug-in so you can use this camera

Click 

Run

 to install Plug-in

Connect the Ethernet cable to your local area network, 
and  connect  the  other  end  to  the  LAN  jack  of  this  IP 
camera.

Connect the antennas to the antenna base located at 
the back of the IP camera.

å

ç

é

è

x 4

x 4

x 1

Lock

▼ 

: Locked position

Отзывы: