60fps Full HD IR Bullet IP Camera
ICA-3260
DIS
(Digital Image
Stabilization)
This function is used to reduce blurring associated with the
motion of a camera during exposure. Specifically, it compensates
for pan and tilt of a camera. With video cameras, camera shake
causes visible frame-to-frame jitter in the recorded video.
Real-time digital image stabilization is used to shift the electronic
image from frame to frame of video, enough to counteract the
motion. This technique reduces distracting vibrations from videos
or improves still image quality by allowing one to increase the
exposure time without blurring the image. This technique does
not affect the noise level of the image.
2D/3D De-Noise
2D/3D De-Noise can remove or lower unwanted noise and
preserve fine details and edges.
Default Settings
Restore to factory image settings.
3.6.2 Exposure Control
Power Frequency
Frequency of power line: 50 or 60Hz.
Exposure Control
Auto-Indoor:
It will adjust the image sensor exposure automatically
under indoor environment.
Manual Exposure:
User can configure sensor exposure to fixed
setting.
Auto: It
will adjust the image sensor exposure automatically.
Maximum
Exposure Time
Set the Maximum Exposure Time. However, the real exposure time
may be shorter if there is a good light condition.
Exposure Value
Exposure value is AE target value. This value is to adjust the
integration, analog gain and digital gain to achieve the target
41