Full HD PoE/ Wireless Cube IP Camera
ICA-1200/W1200
Offset
3.7.3 Maintenance
Default Settings
(Include the network
setting)
Recall the device hard factory default settings. Note that click
this button will reset all device’s parameters to the factory
settings (including the IP address).
Default Settings
(Except the network
setting)
The unit is restarted and most current settings are reset to
factory default values. This action will not reset the network
setting.
Backup Setting
To take a backup of all of the parameters, click this button. If
necessary, it will then be possible to return to the previous
settings, if settings are changed and there is unexpected
behavior.
Restore Setting
Click the “Browse” button to locate the saved backup file and
then click the “Restore Setting” button. The settings will be
restored to the previous configuration.
Firmware upgrade
The device supports new firmware upgrade.
1. Close all other application programs which are not
necessary for firmware update.
2. Make sure that only you access this device at this moment
3. Disable Motion Detection function.
4. Select
“Firmware name”
5. Select the Firmware binary file.
58